How To Prepare Your Roof For Winter

Posted by on May 25, 2015 in Uncategorized |

When winter approaches, it is time to think about preparing different parts of your home, including your roof. The roof is at risk of damage from rain, snow and ice, particularly ice dams. Here are some different ways to prepare your roof for the winter season. Why do you need to prepare your roof for winter? First of all, it can help to know exactly why you need to spend some time getting your roof ready for the winter season. While any season can potentially be hard on your roof, the winter tends to be the harshest. This is especially true if you live somewhere that gets a lot of snow and ice. Even a short hailstorm can do some damage if your roofing structure is already experiencing some wear and tear. Snow can accumulate on the roof’s surface, which may cause ice dams and damage your gutters and siding. Having a lot of rain can do a number on many types of roofing materials, including wood and asphalt. Getting ready for winter will save you from more extensive repairs later on. Do an Initial Inspection While you should call a professional to perform major repairs to your roof before the winter season begins, there are some things you can inspect on your own. Start by checking the gutters and making sure they are in good condition. If ice dams form in or around the gutters, it is already going to do some damage. Gutters that are already looking worn might fail after the first snowfall. Also check your roofing shingles or tiles, looking for cracks or holes. Be careful as you inspect your roof, only heading up if you feel safe doing so. Address Potential Leaks When inspecting your roof, you might not have noticed major holes or cracks, but you could have some moisture inside your home. Even without a big puddle of water on the floor, you could still have an area of your roof that will leak during the next rainfall or snowstorm. To check for a possible leak, look inside your home at all of the ceilings and walls. If you see a spot of the wall or ceiling that looks darker than the rest, that is probably moisture or water trying to come through, which is a common sign of having a leak. Make sure you get leaks looked at and repaired before winter. Clean Out the Gutters If you have any debris in your gutters, such as leaves or branches, it needs to be removed. Ice dams tend to be worse if you already have debris in the gutters. When the snow melts, it turns into water and might get stuck in...

Read More

Use Concrete Blocks To Make A Bench That Overlooks Your Backyard

Posted by on May 11, 2015 in Uncategorized | 0 comments

Make a concrete bench that overlooks your backyard with concrete blocks, colorful paint, and a cushion. Once you are finished, you will have a suitable area to sit while reading a book or viewing the foliage and flowers on your property. Use The Following Materials concrete blocks acrylic or latex paint (for exteriors) paintbrush landscape block adhesive caulk gun trowel measuring tape cushion with waterproof covering plastic sheeting Attach The Concrete Blocks To Form A Bench Measure the length and width of the cushion that you are going to be placing on top of the bench. Determine how many blocks you will need to place underneath to support the cushion. A couple rows of blocks placed next to each other can be used to form the base. An additional two rows need to be set on top of the base so that the bench is tall enough to sit comfortably. Set up the bench in a flat area in your yard. Lay out the first two rows of concrete bricks. Attach the adjoining sides with landscape block adhesive and a caulking gun. Apply the adhesive in straight lines across the sides of each block. Spread the adhesive out evenly with a trowel until it covers the concrete. Press the adjoining blocks together until they adhere. This will take a few minutes, but the adhesive will not cure for several days. The adhesive will withstand moisture and will not shrink in the future. Add the second two rows of concrete blocks directly on top of the first two rows and apply the adhesive to connect the blocks.  Paint The Concrete Blocks Place plastic sheeting next to the concrete blocks. Use a standard paintbrush to apply acrylic paint to the exposed sides of each block. Select colors of paint that match the exterior of your home or that complement some of the features on your property. After the paint dries, add a second coat to darken the color on each block. Place the cushion inside of a waterproof cover. Arrange the cushion on top of the bench. Wait a few days for the landscape block adhesive to cure before sitting on the bench. The bench will complement your property and will provide you with a comfortable area to sit when you are spending time outside. Keep your bench looking nice by wiping off the waterproof cover with a soapy sponge whenever the surface appears to be dirty. Occasionally rinse off the concrete bench with a water hose.  For more information about concrete products, visit http://www.unitstepjoliet.com or a similar...

Read More